Specs

Rackable Heavy specs

Setup notes and briefing numbers for Rackable Heavy.

Rack loading figures that matter

These Rackable Heavy specs show the pallet details needed for heavier stock in rack storage. Use them to check whether the pallet matches your load pattern, racking setup and handling equipment.

Rackable Heavy specs are used when stock sits in beam racking and the pallet must carry weight through the bottom deck and runners without sagging. Check overall size, entry points, deck board layout, and safe load in rack, static, and dynamic use. For Gauteng and coastal sites alike, timber moisture, nail hold, and board damage need checking before a loaded pallet goes into a bay.

Start at the first storage bay, not the truck. Measure beam centres, note overhang allowed by your racking supplier, and confirm whether forklifts or reach trucks pick from the long side or short side. Mixed repairs can change height and stiffness, which affects stable stacking and how the pallet sits on rails or beams.

What to confirm before use

Rackable Heavy specs need to cover the key numbers for handling heavier cartons, drums, or bagged product on a rackable timber pallet. Compare the spec against your load pattern, wrap tension, and fork tine spacing before ordering or moving volume. A pallet that works in block stacking may still fail the test once only the edges are supported in racking.

Use the figures here with your bay measurements and current pallet sample before releasing stock to store. Confirm quantity, repair grade, and whether damaged units are being separated from rackable stock at dispatch. Pallet orders are priced on size, quantity and load weight, together with the address where the stack will be off-loaded.

  • Rack load, static load, dynamic load
  • Entry direction checked against site equipment
  • Repair grade noted before loading

Checks for South African sites

At OR Tambo, Crown Mines, Durban, or Cape Town operations, heavier pallet loads often move between storage, cross-dock, and linehaul without much margin for wrong sizing. Measure what is on site instead of relying on an old stock code. Beam spacing, dock leveller angle, and trailer loading pattern all affect whether the same pallet spec remains suitable through the full move.

Coastal humidity can swell boards and change pallet mass, while dry inland conditions expose splits around nail lines and repaired bearer sections. Dust builds up on wrapped loads and can hide broken deck boards during quick checks. During power cuts, manual handling increases, so pallet condition needs tighter sorting before stock is raised into racking.

Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.

Site notes to send with specs

Send the loaded unit weight, product type, pallet footprint, and a photo of the pallet sitting on the rack beams. Add any failure point you have seen, such as cracked bottom boards, loose blocks, or deflection in the centre under full stock.

Keep this spec with the bay measurement sheet and the pallet count used for that lane or product line. Buyers and warehouse teams usually need one record showing what was stored, on which pallet, and under what rack conditions.

What our Pallet Supply customers say

Verified Google reviews